MaxTiger Block Carpet Adhesive Mob 8010 KY is a slip-resistant dispersion coating for loose-laid carpet tiles.

Ready to use, water-based and fluid tackier. Dries to a transparent, rubber-like coat which reduces the potential for slipping and movement of loose-laid tiles.

Product benefits / properties

• Quick drying

• Loose-laid tiles are removable

• Prevents hollow joints and “traffic marks”

• High dimensional stability

• High shear resistance

• Low consumption ( 50-100 gr / m2)

• Antistatic – in combination with loose-laid tiles

• Prevents tile from moving

• Solvent-free

Areas of Application

For loose-laid tiles with bitumen, PVC, or PUR backing for antistatic loose-laid tiles for access flooring and raised flooring panels on absorbent and non-absorbent substrates suitable for warm water underfloor heating for exposure to castor wheels in accordance with TGM 79.

Technical Data

Consumption : 50-100 gr/m2

Working Temperature : Min 15 °C at floor level

Drying Time        : 30-60 minutes

Working Time      : Approx. 48 hours

Shelf Life : Min. 12 Months

Application

Shake the container well. Pour the contents into a clean container and then apply evenly onto the surface using a fine-pored foam roller. Use

a roller wipe-off grid and apply a very thin coat. Avoid pooling.

Never allow between the joints of access flooring panels as there is a risk of panel bonding. Cover joints or apply away from panel edges.

According to subfloor type and climatic conditions, allow to dry for

30 – 60 minutes until completely transparent. Too thick an application or insufficient drying can lead to bonding of the SL tiles.