MaxTiger Floor Moisture MOB 7150 / PUR It is a one component polyurethane based primer that can be applied on water and moisture resistant, moist or wet concrete surfaces.

Place of use

• Moist, damp concrete

• Wet or wet concrete, tile, wood, asphalt and asphalt membranes

• Water tanks made of concrete, steel or other materials

Benefits

• Excellent adhesion to almost any surface

Features

• It is a two-component material.

• It is resistant to water and moisture and has superior insulation.

• Excellent adhesion to almost any surface.

• Solvent free, can be applied easily in environments without ventilation.

• Cures even at low temperatures and under water films.

• Good resistance to chemicals.

• Resistant to sudden temperature changes (hot to cold).

• Easy to mix. It is ready to use in a short time.

• Provides strong adhesion to the surface.

• Low viscosity and easy to apply.

• A smooth surface is obtained by filling the roughness on the applied surface.

Technicial Specifications

Color : Clear yellow clear

Density (25ºC) : 1 g / cm3

Weight of use :4.5

Time of Use (25ºc) : 20-30 Minutes

First Drying (25ºc) : 4 Hours

Final drying time (25ºc) : 24 hours

Hardness (DIN 53505) : 25-30 (Shore D)

Application Amount (25ºc) : 300-400 gr / m2

Application Temperature : 10-40 ºC

Application

• Surfaces must be cleaned from oil, dirt, dust and waste.

• II. Component I is added to the component.

• Mix until a homogeneous color is obtained.

• The resulting mixture can be applied by roller or brush.

• The prepared mixture should be consumed within ~ 30 minutes.

• Depending on the porosity and absorbency of the surface; 300-400 gr / m2.

Considerations

• Since the pot life is short, it should be mixed in quantity and spread on the surface immediately.

• Never refine the product when priming on wet surfaces or water films

• Unfinished surfaces should be cleaned with thinner within 5–10 minutes.

• In case of eye contact, rinse the eye with plenty of water and seek medical dvice immediately.

• It is useful to wear gloves during operation.

• Tools and equipment at the end of use thinner, acetone and so on. should be cleaned with.